We're Building All Winter! Get Your Deck Ready for Spring. Schedule Your Consultation →

Outdoor Fireplace and Fire Pit Installation in Northern Illinois

A fire feature anchors the outdoor space. Fireplaces and fire pits serve as focal points for seating areas on decks, patios, and covered porches, with the fuel source, scale, and placement mapped in the 3D design before materials are ordered. Wood-burning and gas-fired configurations are available as freestanding units or built into walls, seating areas, and hardscape surrounds.

Outdoor paver patio with a stone fire pit, two wicker armchairs, and decorative lantern pillars.

WE’RE TRUSTED BY:

A paved patio featuring a tiled octagonal fire pit surrounded by four dark grey Adirondack chairs.

The Fireplace: Heat With a Wall Behind It

Firebox, chimney, hearth. The flame faces the seating area; the structure backs up to a wall, a patio edge, or open sky.

  • Wood-Burning: Masonry or prefabricated firebox with a chimney for natural draft; cordwood or manufactured logs. 
  • Gas: Direct-vent or vent-free units on a gas line, with electronic ignition and adjustable flame height. 
  • Surround and Hearth: Stone veneer, brick, or stacked stone over a concrete block or steel frame; finish selected alongside the deck or patio surface, with fireplace installation in Northern Illinois.
  • Placement: Oriented away from prevailing wind, with clearance from the home, overhead framing, and combustible surfaces.
Outdoor paver patio with a stone fire pit, two wicker armchairs, and decorative lantern pillars.

The Fire Pit: Flame at the Center

A fire pit sits at or near grade and draws seating inward from all sides, with firepit installation in Northern Illinois. Designs range from a simple ring on pavers to a custom feature built into the patio or deck layout.

  • Built-In: Set into the hardscape with a defined border, cap, and interior liner; gas or wood-burning.
  • Freestanding: Portable or semi-permanent units on a non-combustible pad; repositioned seasonally or between projects.
  • Seating Radius: Location and diameter are coordinated with benches, walls, or chairs to ensure a comfortable distance from the flame and room to move behind each seat.
An outdoor stone patio at twilight featuring a circular stone fire pit with a glowing fire. Behind the patio, a stacked stone retaining wall with built-in lights curves along a landscaped garden bed.

From Gas Line to Finished Surround

The installation method depends on the fuel type, the surface beneath the feature, and whether the project is a new build or an addition to an existing structure.

  • Gas Line Routing: Supply lines are mapped in the project plan and routed during framing; connection points, shut-off valves, and line depth are specified before the surround is closed.
  • Structural Requirements: For an existing deck or patio, we evaluate the substructure for load capacity during the consultation. New builds account for the weight in the framing plan from the start.
  • Code and Permitting: Clearance distances, fuel line specs, and chimney height vary by municipality; we handle all permits and HOA submissions in-house.

Where the Standard Comes From

Echelon Deck Group was founded in 2021 when Andrew DeBruyne left one of the largest deck companies in the country and approached Gil Alvarez about building something different. What started as two people betting on their own standard has grown into a two-crew operation with 15 years of combined experience and a client portal that keeps the build schedule visible from start to finish.

A Closer Look at Fire Features on Finished Projects

Browse completed fireplace, fire pit, and outdoor living projects across Northern Illinois and Southern Wisconsin for material, layout, and finished detail, from an outdoor firepit contractor in Northern Illinois.

Every Project Tells a Story

Reputation is built one project at a time. Read what homeowners said when the work was done.

Fireplaces & Fire Pits Contractor FAQs

How do I decide between an outdoor fireplace and a fire pit?
A fireplace works best against a wall or at the edge of a space where seating faces one direction, since the heat and flame project forward. A fire pit works best in an open area where chairs or benches wrap around the flame from multiple sides. The choice comes down to the layout: a linear seating arrangement favors a fireplace; a circular arrangement favors a fire pit.
A paver patio can often support a fire pit without structural changes. A wood or composite deck may need reinforcement, a heat-rated base, or a revised post layout depending on the fire feature’s weight and fuel type. Fireplace contractors include any required modifications in the project scope.
What determines whether a fire feature can go on a deck versus a patio?
Weight, heat output, and fuel type drive the decision. A lightweight gas fire pit with an insulated base may work on a reinforced deck. A heavy masonry fireplace typically requires a concrete or paver surface at grade. The proposed surface and fire feature are modeled together in the 3D design so setback and structural requirements are confirmed before materials are ordered.
Most municipalities in Northern Illinois and Southern Wisconsin require a permit for any permanent fire feature with a gas connection. Wood-burning fire pits may require a permit depending on the structure’s size, location relative to property lines, and local burn ordinances. Permitting paperwork and HOA submissions are included in the project scope.